Wondering which of the construction equipment between the JCB 3DX Backhoe Loader Vs Preet Hornett 4WD Backhoe Loader is best for your work. Then we have the answer, Infra Junction provides you with a comparison tool which can easily compare JCB 3DX Vs Preet Hornett 4WD on your standards and parameters. For example, the price of JCB 3DX is ₹ 35 - 38 Lakh whereas, the price of Preet Hornett 4WD is not available . JCB 3DX has an engine power of 37 kW (49hp) @ 2 050 rpm and Preet Hornett 4WD comes with a 96 Hp engine power. Both of these Backhoe Loaders are proficient in the heavy loading work. So, compare the JCB 3DX and Preet Hornett 4WD at Infra Junction to know which backhoe loader is appropriate for your needs.
Select Vehicle
Select Vehicle
Select Vehicle
| Engine | JCB 3DX | Preet Hornett 4WD |
|---|---|---|
| Compliant | CEV Stage V Engine | N/A |
| Model | JCB 430 | 4R1040 Ta2 |
| Displacement | 3000cc | 4156cc |
| Gross Power | 37 kW (49hp) @ 2 050 rpm | 96 Hp |
Show More |
| Loader General Dimension | ||
|---|---|---|
| Dump Height | 2740mm | 2850mm |
| Load Over Height | 3320mm | 3330mm |
| Hinge Pin Height | 3540mm | 3510mm |
| Hinge Pin Forward Reach | 250mm | 3530mm |
| Show More |
| Backhoe Loader Dimension | ||
|---|---|---|
| Maxd Dig Depth | 4770mm | 4700mm |
| Reach ground level to Swing Center | 5400mm | N/A |
| Reach Ground level to rear wheel center | 6720mm | 6700mm |
| Reach at full height to slew center | 2900mm | 2680mm |
| Show More |
| Overall Dimension & Weight | ||
|---|---|---|
| Max Operating Weight | 7200Kg | 7845Kg |
| Transport Length | 5900mm | N/A |
| Width Over Bucket | 2350 MM | 2230 mm |
| Track Width Rear | 1730 MM | 1730 mm |
| Show More |
| Hydraulic System | ||
|---|---|---|
| System Type | N/A | Open Center Hydraiulics |
| Pump type | Filtration through suction strainer and return line ‘JCB Filtromatic Filter’ | Tendom Pump |
| Pump Flow | 114 Lpm | N/A |
| System Relief Pressure | N/A | 270 bar |
| Service Capacities | ||
|---|---|---|
| Engine Oil | 15Ltr | 9.5Ltr |
| Rear Axle | 20 Ltr | N/A |
| transmission Oil Capacitysystem | 17.5 Ltr | N/A |
| Fuel Tank | 128Ltr | 150Ltr |
| Show More |
| Axle | ||
|---|---|---|
| Rear | Drive axle rigidly mounted, incorporates JCB Max-Trac torque proportioning differential, driven by short prop shaft from gear box | Carrao make rigidly mounted wit max. torque proportioning differential, driven by short propler shaft from gear box. |
| Front | Steer axle, centrally pivoted, with oscillation angle of 16 | Carrao make Front Axle drive woth Equam turn, power steering, hydraulic supply from independent steering pump drive & high oscillation angle. |
| Steering | ||
|---|---|---|
| Type | Power track steering | Power Steering |
| System Pressure | 160 bar | N/A |
| Turning Circle Diameter Otside Bucket | 11600mm | N/A |
| Turning circle Diameter Outside Bucket Not Braked | 8640mm | N/A |
| Brakes | ||
|---|---|---|
| Brakes service | JCB ‘Q’ brakes, hydraulically actuated, dual line, self adjusting (compensated), oil immersed, multi-disc type on the rear axle, well protected from dirt, water etc. requiring no maintenance. Operated | Brake wioth hydraulic actuated dual line oil immersed multi disc type wet brakes on the rear axle |
| Brakes Parking | Hand operated, disc brakes on rear axle input disc. | Axle mounted spring applied Hydraulic release |
| Tyre | ||
|---|---|---|
| Standard tyre front | 9 x 16 - 16 PR | 12.5 x 80/18 20 PR |
| standard tyre rear | 16.9 x 28 - 12 PR | 14.25 x 25 -20 PR HD / 16.9 x 28-12 PR |
| Electrical System | ||
|---|---|---|
| Battery | 12 V | N/A |
| Travel System | ||
|---|---|---|
| Forward | 5/8/17/32.3 kmph | N/A |
| Reverse | 5 / 8 kmph | N/A |
Connect With Us
4th Floor, Tower 23, A23, Block A, Sector 9, Noida, Uttar Pradesh 201301
© 2026 InfraJunction. All Rights Reserved.
