Wondering which of the construction equipment between the CASE 770NXe Backhoe Loader Vs JCB 3DX Backhoe Loader is best for your work. Then we have the answer, Infra Junction provides you with a comparison tool which can easily compare CASE 770NXe Vs JCB 3DX on your standards and parameters. For example, the price of CASE 770NXe is ₹ 28 - 30 Lakh whereas, the price of JCB 3DX is ₹ 35 - 38 Lakh . CASE 770NXe has an engine power of 49.5 HP and JCB 3DX comes with a 37 kW (49hp) @ 2 050 rpm engine power. Both of these Backhoe Loaders are proficient in the heavy loading work. So, compare the CASE 770NXe and JCB 3DX at Infra Junction to know which backhoe loader is appropriate for your needs.
Select Vehicle
Select Vehicle
Select Vehicle
| Engine | CASE 770NXe | JCB 3DX |
|---|---|---|
| Compliant | BS-III | CEV Stage V Engine |
| Model | S8000 | JCB 430 |
| Displacement | 3900cc | 3000cc |
| Air Intake Type | Water Cooled | N/A |
Show More |
| Loader General Dimension | ||
|---|---|---|
| Dump Height | 2720mm | 2740mm |
| Load Over Height | 3300mm | 3320mm |
| Hinge Pin Height | 3580mm | 3540mm |
| Hinge Pin Forward Reach | 240mm | 250mm |
| Show More |
| Backhoe Loader Dimension | ||
|---|---|---|
| Dipper Configuration | 14 Feet | N/A |
| Maxd Dig Depth | 4400mm | 4770mm |
| Reach ground level to Swing Center | 5630mm | 5400mm |
| Reach Ground level to rear wheel center | 6950mm | 6720mm |
| Show More |
| Overall Dimension & Weight | ||
|---|---|---|
| Max Operating Weight | 7610Kg | 7200Kg |
| Transport Length | 5880mm | 5900mm |
| Width Over Stabilizer | 2270 MM | N/A |
| Width Over Bucket | 2280 MM | 2350 MM |
| Show More |
| Hydraulic System | ||
|---|---|---|
| System Type | Open Centre Load Sensing system | N/A |
| Pump type | Axial Piston with Electric Displacement Cntrol | Filtration through suction strainer and return line ‘JCB Filtromatic Filter’ |
| Pump Flow | 119 lpm | 114 Lpm |
| System Relief Pressure | 240 Bar | N/A |
| Service Capacities | ||
|---|---|---|
| Engine Oil | 8.6Ltr | 15Ltr |
| Rear Axle | 17.1 Ltr. | 20 Ltr |
| Hydraulic Oil Replacement | 48/4000 hr. | N/A |
| transmission Oil Capacitysystem | 18 Ltr. | 17.5 Ltr |
| Show More |
| Power Train | ||
|---|---|---|
| Transmission make and model | CARRARO 2WD TLB1 | N/A |
| Powertrain Type | 4F-4R Shuttle Synchromesh Transmission | N/A |
| Axle | ||
|---|---|---|
| Rear | CARRARO 28.32M | Drive axle rigidly mounted, incorporates JCB Max-Trac torque proportioning differential, driven by short prop shaft from gear box |
| Front | CNH PS1300 (2WD) | Steer axle, centrally pivoted, with oscillation angle of 16 |
| front axle Oscillation | ±21 Degree(2WD) | N/A |
| Steering | ||
|---|---|---|
| Type | Power Steering | Power track steering |
| System Pressure | 140 Bar | 160 bar |
| Unit Displacement | 125 CC | N/A |
| Turning Circle Diameter Otside Bucket | 4.6mm | 11600mm |
| Show More |
| Brakes | ||
|---|---|---|
| Brakes service | Hydraulic foot operated, 2 disc per side | JCB ‘Q’ brakes, hydraulically actuated, dual line, self adjusting (compensated), oil immersed, multi-disc type on the rear axle, well protected from dirt, water etc. requiring no maintenance. Operated |
| Brakes Parking | Mechanically actuated caliper type brake pack on Rear axle input shaft | Hand operated, disc brakes on rear axle input disc. |
| Tyre | ||
|---|---|---|
| HD tyre rear optional | 14x25- 12PR | N/A |
| Standard tyre front | 9x16 -16PR | 9 x 16 - 16 PR |
| standard tyre rear | 16.9x28 -12PR | 16.9 x 28 - 12 PR |
| Electrical System | ||
|---|---|---|
| Battery | 12 volts, 110 Ah | 12 V |
| Travel System | ||
|---|---|---|
| Forward | 5.0/7.9/16.9/32.4 | 5/8/17/32.3 kmph |
| Reverse | 5.9/9.4/19.8/NR | 5 / 8 kmph |
Connect With Us
4th Floor, Tower 23, A23, Block A, Sector 9, Noida, Uttar Pradesh 201301
© 2026 InfraJunction. All Rights Reserved.
