Wondering which of the construction equipment between the ACE AX-124 NS Backhoe Loader Vs JCB 4DX Backhoe Loader is best for your work. Then we have the answer, Infra Junction provides you with a comparison tool which can easily compare ACE AX-124 NS Vs JCB 4DX on your standards and parameters. For example, the price of ACE AX-124 NS is ₹ 31 - 33 Lakh whereas, the price of JCB 4DX is ₹ 36 - 40 Lakh . ACE AX-124 NS has an engine power of 74 HP and JCB 4DX comes with a 74 HP engine power. Both of these Backhoe Loaders are proficient in the heavy loading work. So, compare the ACE AX-124 NS and JCB 4DX at Infra Junction to know which backhoe loader is appropriate for your needs.
Select Vehicle
Select Vehicle
Select Vehicle
| Engine | ACE AX-124 NS | JCB 4DX |
|---|---|---|
| Compliant | CEV BS-IV | CEV Stage V Engine |
| Model | KIRLOSKAR make (Bs III) | JCB 430 |
| Displacement | N/A | 3000cc |
| Gross Power | 74 HP | 74 HP |
| Show More |
| Loader General Dimension | ||
|---|---|---|
| Dump Height | 890mm | 2930mm |
| Load Over Height | 3300mm | 3370mm |
| Hinge Pin Height | N/A | 3640mm |
| Reach At Ground | N/A | 1600mm |
| Show More |
| Backhoe Loader Dimension | ||
|---|---|---|
| Maxd Dig Depth | 4250mm | 5360mm |
| Reach ground level to Swing Center | N/A | 6380mm |
| Reach Ground level to rear wheel center | N/A | 7570mm |
| Reach at full height to slew center | N/A | 2180mm |
| Show More |
| Overall Dimension & Weight | ||
|---|---|---|
| Max Operating Weight | 7500Kg | 8470Kg |
| Transport Length | N/A | 6350mm |
| Width Over Bucket | 2380 MM | 2440 MM |
| Track Width Rear | 1600 MM | 1730 MM |
| Show More |
| Hydraulic System | ||
|---|---|---|
| Pump Flow | 118 IPM | 154 Lpm |
| System Relief Pressure | 210 Bar | N/A |
| Service Capacities | ||
|---|---|---|
| Engine Oil | 11Ltr | 15Ltr |
| Rear Axle | Front: Drive (In case of 4 WD and Steer Axle), Rear: Rigid axle with Carraro planetary drive. | 20 Ltr |
| transmission Oil Capacitysystem | 17 Ltr | 17.5 Ltr |
| Fuel Tank | 150Ltr | 128Ltr |
| Show More |
| Axle | ||
|---|---|---|
| Rear | Rigid axle with CARRARO planetary drive | Drive axle rigidly mounted, incorporates JCB Max-Trac torque proportioning differential, driven by short propshaft from gear box |
| Front | Drive & Steer Axle, centrally pivoted | Steer axle, centrally pivoted, with oscillation angle of 16 |
| Steering | ||
|---|---|---|
| Type | Hydrostatic steering for reliability and better control | Power track steering |
| System Pressure | N/A | 2320 p.s.i. (160 bar) |
| Turning Circle Diameter Otside Bucket | N/A | 10700mm |
| Turning circle Diameter Outside Bucket Not Braked | N/A | 12450mm |
| Brakes | ||
|---|---|---|
| Brakes service | Hydraulically actuated wet disc brakes at rear wheels with twin pedals in cabin for better control | JCB ‘Q’ brakes, hydraulically actuated, dual line, self adjusting (compensated), oil immersed, multi-disc type on the rear axle, well protected from dirt, water, requiring no maintenance.Through indep |
| Brakes Parking | Mechanically actuated disc brakes for parking | Hand operated, disc brakes on rear axle input disc. |
| Tyre | ||
|---|---|---|
| Standard tyre front | 9.00 - 16-16 PR | 9 x16 -1 6PR |
| standard tyre rear | 16.90 - 28 - 12 PR | 16.9 x 28 -12PR |
| Electrical System | ||
|---|---|---|
| Battery | 12 V | N/A |
Connect With Us
4th Floor, Tower 23, A23, Block A, Sector 9, Noida, Uttar Pradesh 201301
© 2026 InfraJunction. All Rights Reserved.